FG-035 - British White Ensign (1942-1944)

FG-035 – British White Ensign (WWII-era)
FG-035 full view
FG-035 – British White Ensign, printed wool, WWII

Flag ID: FG-035

Material and Construction

FG‑035 is a British White Ensign, printed in wool bunting with horizontal ribbed weave typical of British naval flags. It measures approximately 90 × 180 cm (≈ 3 × 6 ft) and features the red St. George’s Cross on a white field with the Union Flag in the canton (en.wikipedia.org). It is double-sided (not sewn), with a cotton hoist bearing two brass grommets and three brass lacing eyelets. Excellent condition with minimal wear. No label present.

Technical Specifications

ParameterDetail
Flag ID (FG)FG-035
CountryUnited Kingdom
TypeWhite Ensign (Royal Navy)
Estimated period1942–1944 (WWII)
Dimensions90 × 180 cm (~3 × 6 ft)
MaterialPrinted wool bunting
FinishCotton hoist with 2 brass grommets + 3 lacing eyelets
PrintDouble-sided (not sewn)
WeaveHorizontal ribbed weave typical of British naval flags
LabelNone present
ConditionExcellent, minimal wear

Historical Context & Use

  • The White Ensign is exclusively a Royal Navy ensign, in use since early 18th century, and still worn today by commissioned warships and shore establishments (wrens.org.uk).
  • FNFO at Imperial War Museum (IWM Object 30018030): identical printed ensign flown at first British-held station in Algiers, 8 Nov 1942, and later again on D-Day, Normandy 1944 (iwm.org.uk).
  • Another IWM instance flown at beach landings during Sicily/Reggio operations on 3 Sept 1943, widely considered first British flag ashore at Reggio di Calabria (iwm.org.uk).

Operational Use & Size Context

  • Large battle ensigns were traditionally flown on capital ships to signal identification during combat; typical sizes ranged up to 6 × 12 ft for battleships (en.wikipedia.org).
  • Smaller or mid-size ensigns (~3 × 6 ft) would be typical for smaller warships, coastal craft, shore installations, or ceremonial land uses (iwm.org.uk, ima-usa.com).
  • The 90 × 180 cm example matches known standard for reserve / display use at naval stations or shore-based establishments during WWII.

Estimated Chronology

Based on IWM reference and similarities in size and construction, the ensign likely dates from late 1942 to 1944, coinciding with North African landings and Normandy operations. New printed wool and lack of field wear suggests it is a circulated shore/logistics piece, not a battle-damaged ship flag. Absence of maker’s label not unusual for naval-produced ensigns at that time (many were government-issued without commercial tags).

Additional Images

Hoist area with brass grommets and header stitching
Hoist area with brass grommets and header stitching
Stitched lacing loop and brass hook on hoist
Stitched lacing loop and brass hook on hoist
Lower hoist with grommet and rope tie-down
Lower hoist with grommet and rope tie-down
Union Flag canton printed on wool bunting
Union Flag canton printed on wool bunting
Fly end seam with reinforced corner stitching
Fly end seam with reinforced corner stitching
White field showing horizontal wool weave
White field showing horizontal wool weave
Backlit detail of ribbed wool texture
Backlit detail of ribbed wool texture

Sources and References

Comments